- 2225mm(h), 3430mm(w), 1225mm(d)
- 5 Panel System – The largest Exhibition Stand available from Adverset Display
- Includes complete set of heavy weight, 300 micron anti-scratch laminated display graphics
- Stylish, curved design for maximum visual impact at conferences & exhibitions
- Luxury wheeled hard-shell carry case which converts into a counter* with wooden beech top included
- Includes 3 x PS1000 floodlights
* Optional graphic available for counter.
The 3X5 Exhibition Stand is the largest amongst our range of exhibition stands. This huge pop up stand is made up of 5 panels, ensuring maximum impact and brand awareness. So if you are looking to increase the visibility of your products at forthcoming exhibitions, this is the stand for you.
Easy to assemble thanks to ‘easy’ clip-on graphics as well as the innovative ‘snap-up’ frame system, based on magnetic fixings. We are able to provide 3x5 exhibition stand printing, using either your own artwork, or artwork created by our in-house designers.
The 3x5 exhibition stand is a smart mix of technology, practicality and efficiency. Ideal for exhibitions, our 3 x 5 pop up stand is versatile and can be used in foyers, or reception areas. The 3x5 pop up display comes up with a hard-shell carry case for a smooth and safe transit between exhibitions.
Click Here to Order Replacement Graphics for your Exhibition Stand
Whilst we can't send you a sample of an actual stand unit, we would be happy to supply material swatches for the graphic panels, if useful.
Erecting your pop-up stand is very straightforward. Here are a few easy steps:
1. Take out the main frame and pull up until it clicks into place (similar action to a clothes horse).
2. Take out the bag of magnetic strip bars and slot into the sections of the frame. They will click into place with ease.
3. Make sure you have an area of floor to work in. Locate the relevant graphic, which will be a corner piece. This will already attached to a hanger and will be fitted with magnetic strips on the reverse. Hang from the two slots located at the top of the corner section and let the graphic bend naturally. The magnets on the reverse of the graphic should snap into position. Repeat this for the centre panels which will be straight and then finish with the other corner piece.
4. Adjust the graphics if required by moving slightly on the hangers. There should be a small amount of adjustment available.
5. Attach the lights (see file on this under our download tab).
6. Fit the wooden counter top onto the carry case to convert into a counter. Attach the graphic around the counter (if applicable), secure at the back with the double sided velcro which will already be fitted.
You're ready to go!
Reverse the procedure to dismantle, taking care to roll the graphics up carefully - always roll with magnets on the inside, image to the outside.
